If you have a dirty fence and don’t have time to clean it by hand, many DIY cleaning solutions can help you get it clean. Mix it with two gallons of water and apply to the boards with a scrub brush or sponge. Wait 3-5 minutes, don’t let it dry, and then rinse the fence thoroughly with a garden hose at low pressure.
Unlike bleach, this environmentally-friendly Cleaner can be used on concrete and wood surfaces, including fences and decks. For maximum effectiveness, use it under more relaxed conditions, and test it in an inconspicuous area first.
Apply the Cleaner with a soft-bristle brush to the surface and leave it to dwell for up to five minutes. Then, rinse with high-pressure water, avoiding spraying the product upward or under the siding. Mix a mixture of one-third of the Solve and two-thirds of water thoroughly with a garden hose.
Garden Hose
Cleaning your fence with a garden hose can quickly and efficiently get your yard looking fresh and new. While pressure washing your wall, you should first prepare the area by using a metal brush. Then, rinse the area with a garden hose to remove the dirt. You can use an oxygenated bleach solution mixed with water if you have an extremely dirty fence. Apply the solution with a large paintbrush and let sit for 15 minutes. After that, scrub the wall with a plastic bristle brush.
You can use your garden hose to clean your fence. Just make sure you choose a garden hose that has a high-pressure nozzle. It will help remove the dirt more efficiently. It would help if you sprayed the fence from top to bottom, avoiding the areas where the water is pooled and dries. You should also ensure that you spread from left to right to prevent damage to the fence.
Pressure washer
Using a pressure washer to clean a fence is an effective way to restore its appearance and structural integrity. As a result, you can rest assured that the finished product will look clean and new again. A fence that has been exposed to the elements may be weakened, and stains and dirt can become embedded. A pressure washer can effectively remove dirt, colors, and mildew.
When pressure washing a fence, you must choose the proper tools. For example, a pressure washer with a 25-degree tip is most effective. However, you should avoid using a large nozzle, which will not give your fence enough pressure and may cause damage. Another essential factor to consider is the PSI level of your pressure washer. For softer woods, it’s best to use 500 to 800 PSI. When pressure washing a fence, it is best to try it on a small patch to ensure it’s safe for the wall.