Fence Cleaning Knoxville, TN
Call For a Free Quote
It is common for wood fences to accumulate dirt and grime, which is unpleasant and degrades the wall. The process of cleaning a fence isn’t difficult regardless of whether you use a power washer or your hands.
Cleaning Wood Fences With Power Washers
Power washers are much faster than hand washers for cleaning wooden fences, but they can also damage walls if they’re not used carefully. Here are the steps you should follow if you want to make sure your wooden fence gets adequately washed:
- It is recommended to use a wire brush to remove caked-on gunk.
Some types of grime are not easily removed with power washing. After you scrub them off, you may want to do it again. If you wish to power wash your wood fence, make sure you remove any caked-on grime and mud first with a wire brush. You must be extremely gentle when cleaning a painted border.
- If your wooden fence needs to be rinsed, use a garden hose.
You can prepare your wood fence for pressure washing by spraying it with your garden hose. Your hose should be set to medium-high pressure if you want to clean off some dirt on the surface.
- Preparation of the pressure washer is essential.
If you wish to wash a wood fence with pressure, you should do so carefully to prevent damaging it. You might also want to consider using a pressure washer tip that blows out the water. To achieve the best results, use an angle of 25 degrees.
- Long and even strokes are recommended for cleaning wood fences.
When pressure washing your wooden fence, use long and even strokes from about two feet away. Keep following the wall until there is no more dirty runoff coming from it. After spraying from right to left, stop spraying when the dirt is no longer visible.
Power washers should not be pointed at the same spot for long periods of time. Water sprayed continuously in one location may damage your wooden fence. Using long strokes to clean your wall will carry less water than short strokes.
Fungus, Mold, And Algae Removal Guide
After pressure washing or hand washing your wooden fence, the fungus may still be present. Here are the steps you need to follow to remove them:
- Getting rid of algae and mold.
It is possible for mold and algae to grow on your wood fence, and they can leave behind green stains if they are not removed. The best way to get rid of these growths is to mix chlorine bleach with water in a ratio of one part to two parts. You should scrub your fence with a plastic bristle brush after using this mixture to remove mold or algae. When you have removed mold or algae from your lawn, use your garden hose to rinse all the areas where they were present.
- Getting rid of moss and mildew is essential.
Mold and algae are also detrimental to your fence, so moss and mildew will damage it and make it unsightly. There is a different approach to removing these growths. The combination of 1 gallon of water and 12 cups of vinegar is effective at eliminating moss and mildew. After applying the mixture with a sponge, allow the mixture to sit on the wood fence for 15 minutes. Use a plastic bristle brush to scrub off the moss or mildew once it has been removed. After the surface has been cleaned, you will rinse it off with your garden hose.
If your wood fence becomes unsightly after being washed, the time may be right for a fence replacement. With Knoxville Gutter Cleaners, you can have a brand new fence installed. In Iowa, no project is too big or too small for us, as we have many years of experience installing beautiful new borders. In Tennesse, no project is too big or too small for us, as we have many years of experience installing beautiful new borders.
Is your fence in need of a good cleaning service? Contact us today!